Littelfuse launches new high-power TVS Diodes for high-voltage DC applications

Littelfuse, an industrial technology manufacturing company, has launched the AK-FB and AK-A series of high-power TVS diodes, designed to protect high-voltage DC (HVDC) power electronics from damaging overvoltage transients while delivering exceptional latch-up-free clamping performance

Developed for the surge and switching-transient demands of modern HVDC systems, the new TVS diodes address a key challenge in high-power design: protecting costly, sensitive solid-state electronic switches based on SiC, GaN, or Si without exceeding their absolute maximum ratings.

The AK-FB series uses Littelfuse’s controlled-foldback technology to maintain a near-constant, ultra-low clamping voltage in transient events. It also ensures that the minimum snapback voltage (VSB) remains at or above the reverse standoff voltage (VR), eliminating DC-supply latch-up risk. This benefit extends to AC applications.

The AK-A series is designed to maximise power dissipation across its rated current range. Its clamping voltage, while higher than the AK-FB series, remains below that of a conventional TVS diode and metal-oxide varistors (MOVs), providing a wider margin from latch-up while still delivering ultra-low clamping performance.

Ben Huang, director of product management, SBU, Littelfuse, said, “The AK-FB and AK-A series were designed specifically for the demands of HVDC applications. They enable high-power-density HVDC designs and help protect costly, sensitive components, including SiC, GaN, or Si, from damage caused by overvoltage transients.”

The AK-FB series is available in 3, 6, 8, and 10kA peak pulse current (IPP) ratings, while the AK-A series is available in 1, 3, and 6kA ratings, providing designers a range of surge-current options within an identical footprint across the AK series.

For example, in a device rated 430V at 6kA peak pulse current, the AK6-430C-FB clamps at just 580V, compared to 625V for the existing standard-clamp AK-Y series from Littelfuse, demonstrating the meaningful reduction in clamping voltage the new series enables.

Key Features and Benefits

  • Controlled-foldback protection (AK-FB): The minimum snapback voltage (VSB) remains at or above the reverse standoff voltage (VR), eliminating DC-supply latch-up risk
  • Wider latch-up margin (AK-A): Maximises power dissipation across the rated current range for added design headroom.
  • Best-in-class ultra-low clamping voltage: Reduces stress on sensitive downstream components compared to conventional TVS diodes and MOVs
  • High surge-current ratings: 1, 3, 6, 8, and 10kA (8/20ms) peak pulse current (IPP) options across the AK-A and AK-FB series
  • Identical footprint across the AK series: Simplifies design and board layout, with both through-hole and surface-mount options
  • Cost efficiency: Enables use of lower-voltage-rated downstream components, reducing BOM cost
  • High-reliability construction: Supports mission-critical, high-power AC and DC applications

The devices are optimised to protect solid-state electronic switches based on SiC, GaN or Si, and other vulnerable power components in high-voltage DC systems, particularly where power density and reliability are critical design priorities.

Target Markets and Applications

  • HVDC converters
  • Battery energy storage systems (BESS)
  • Data centre HVDC power supplies
  • Solid-state transformers (SST)
  • Solid-state circuit breakers (SSCB)

By combining high surge-current capability with ultra-low, latch-up-free clamping performance, the AK-A and AK-FB series help engineers design more robust, efficient, and cost-effective HVDC power electronics platforms.

Share This Article
Leave a Comment